As a supplier of thermally broken steel windows and doors, I get this question all the time from architects, contractors, and homeowners weighing window upgrades: Are thermally broken steel windows better than aluminum thermal break windows? It’s a fair question, and one that deserves more than a surface-level answer—because the “thermal break” label, while key, is only one piece of the puzzle. I’ve installed and supplied both types of products over 12 years in this industry, and I’ve seen firsthand where each excels, and where steel pulls ahead in ways that many people don’t expect. Let’s break this down with real-world science, not just marketing fluff, so you can make the right choice for your project. Thermally Broken Steel Window and Door

First, let’s start with the basics to make sure we’re all on the same page. A thermal break is a strip of insulating material—usually polyamide or a rigid foam—that separates the interior and exterior frames of a window, stopping heat from transferring directly through the metal. Without it, aluminum and steel would act like a conductive bridge, letting hot or cold air bleed through your building’s envelope and driving up energy bills. But the metal itself? That’s where the big differences lie.
Let’s talk about thermal conductivity, the core of why thermal breaks matter. Thermal conductivity measures how well a material moves heat; the lower the number, the better it is at resisting heat transfer. Steel has a thermal conductivity of about 50 W/m·K (watts per meter-kelvin), while aluminum clocks in at over 200 W/m·K. Wait, that’s a big gap—so aluminum is way more conductive than steel, even with a thermal break. But how does the thermal break factor in here? Thermal breaks work by creating a narrow, low-conductivity gap between the two sides of the frame. For both metals, that break is the same thickness (usually 16mm to 24mm, depending on the manufacturer), so the metal’s inherent conductivity becomes the deciding factor. That means a thermally broken steel window will always have a lower U-factor (the official measure of window heat loss, lower = better) than a thermally broken aluminum window of the same size and frame design.
I’ll give you a real example we calculated on a recent commercial office project in Minneapolis, where winter temperatures regularly drop below zero. We installed 1,200 square feet of thermally broken steel windows with a U-factor of 0.28 W/m²·K, per Energy Star testing. A comparable aluminum thermal break window, same size, same glass package (double low-e argon), came in at 0.35 W/m²·K. Over a year, that’s a 20% difference in heating energy use for the office. Multiply that by 10 buildings, and you’re looking at tens of thousands of dollars in annual utility savings. For residential projects, that translates to lower heating and cooling costs for decades—something that aluminum windows, even with a thermal break, can’t match because of the metal’s higher conductivity.
But wait, some will argue that aluminum thermal break windows have a slimmer profile, better for modern architecture. It’s true that aluminum can be extruded into thinner frames, which look sleek. But steel can match that slimness too—modern thermally broken steel windows often have frames as narrow as 25mm, comparable to high-end aluminum. And for projects looking for durability, steel’s strength is a game-changer here. Let’s talk about structural performance. Steel has a yield strength of about 250 MPa (megapascals) for standard structural steel, while aluminum’s yield strength is around 90 MPa. That means steel is nearly three times stronger than aluminum, for the same frame thickness. What does that mean in the real world? You can use steel windows with much larger glass lites without needing heavy, bulky mullions (the vertical or horizontal bars that hold glass panes together). For a 10-foot-wide picture window, a thermally broken steel frame can support a single pane of glass without a mullion, creating a seamless, unobstructed view. An aluminum frame would need a mullion in the middle to prevent the frame from bowing under the weight of the glass, which breaks up that clean look.
That strength also translates to impact resistance and longevity. Steel is far more resistant to dents, scratches, and warping than aluminum. I’ve had customers tell me their aluminum windows started to warp after 15 years of Florida sun, where the heat caused the extruded frames to expand and contract repeatedly, pulling the thermal break out of alignment. Thermally broken steel frames, with their higher rigidity, handle that thermal movement much better. And while aluminum is often marketed as corrosion-resistant, that’s a bit of a myth for coastal or high-humidity areas. Aluminum can suffer from galvanic corrosion when paired with other metals, and its soft surface scratches easily, leading to discoloration over time. Thermally broken steel, when properly finished with a powder coat or galvanized coating, is just as corrosion-resistant—if not more—than aluminum, and it retains its finish far longer because the material is harder.
Another big factor: condensation control. Condensation happens when warm, moist indoor air hits a surface that’s below the dew point. Because steel is less conductive than aluminum, the interior surface of a thermally broken steel window stays closer to room temperature, rather than dropping to the exterior temperature like an aluminum window does. In the winter, that means no more wet window sills, mold on the frame, or excess humidity in your home or office. We tested this on a residential project in Seattle, where condensation is a constant issue. The aluminum windows in that home had visible condensation on the interior frame during the first week of winter, while the thermally broken steel windows stayed completely dry. That’s a huge benefit for indoor air quality, especially for homes with kids, people with allergies, or commercial spaces where mold is a compliance risk.
Now, let’s address the common counterarguments against steel. The biggest one people hear is that steel is heavier, so it costs more to ship and install. It’s true that steel frames are heavier than aluminum, but the cost difference is often smaller than you think, especially for mid to large projects. The energy savings you get from lower U-factors typically offset the initial cost difference within 5-7 years, depending on your location and energy prices. Plus, steel’s strength means you can cut down on structural costs. For a new build, the thinner mullions for aluminum require extra structural support around the window opening, while steel’s strength lets you use smaller headers and jambs, reducing labor and material costs on the framing. For retrofits, steel windows often fit into existing openings with fewer modifications than aluminum, because you can trim steel to exact sizes more easily than extruded aluminum, which has limited customization.
Another argument is that aluminum is more recyclable. It’s true that aluminum has a high recycling rate, but steel is also highly recyclable—98% of steel products are recyclable, and thermally broken steel windows are no exception. The insulating thermal break strip can be easily removed and recycled separately, so there’s no downside to steel’s recyclability. In fact, because steel windows last 2-3 times longer than aluminum windows, they create far less waste over their lifespan. If you replace aluminum windows every 20 years, that’s a lot more material going to landfills than replacing steel windows every 50+ years.
Wait, let’s also talk about air and water infiltration, two key metrics for window performance. The National Fenestration Rating Council (NFRC) tests both air leakage (how much air seeps through the frame) and water resistance (how well the window keeps out rain). Because steel frames are more rigid, they seal better against the surrounding building envelope, reducing air infiltration by up to 30% compared to aluminum thermal break windows of the same size. We’ve had projects in hurricane zones, like Miami, where thermally broken steel windows passed APWA (American Public Works Association) hurricane resistance tests, while aluminum thermal break windows required additional gasketing to meet the same standards. That rigidity also reduces the risk of water leaking around the frame, which is a top complaint for residential and commercial building owners.
I know a lot of architects and homeowners are also concerned about design flexibility. Thermally broken steel windows come in a huge range of styles—casement, awning, double-hung, fixed, sliding, even custom shapes like arches and circles. The powder coat finish can be any RAL color, so you can match your building’s exterior exactly, whether you want a classic black steel frame or a bold custom color. Aluminum can do that too, but steel’s powder coat adheres better, so it doesn’t chip or fade as quickly. We’ve supplied steel windows for projects with historic renovations, where they needed to match the original steel frames from the 1920s, and for modern minimalist homes, where thin black steel frames complement floor-to-ceiling glass. There’s no limit to design with thermally broken steel.
Let’s get real about what this means for your project. If you’re building a small residential home in a mild climate, and you prioritize a lower initial cost and a very slim frame, aluminum thermal break windows might work for you. But if you’re building a commercial office in a cold climate, a coastal home, a high-rise apartment, or any project where energy efficiency, durability, and low long-term costs matter, thermally broken steel windows are the better choice. I’ve seen too many clients regret choosing aluminum to save a few dollars upfront, only to deal with higher utility bills, warped frames, and condensation issues within a decade.
At the end of the day, the question “which is better” comes down to tradeoffs, but the data clearly shows that thermally broken steel windows outperform aluminum thermal break windows in almost every key category that matters for long-term value. The lower thermal conductivity leads to better energy efficiency, the higher strength leads to larger glass lites and less structural work, the rigidity leads to better condensation and weather resistance, and the durability means you won’t have to replace your windows nearly as often.

If you’re ready to learn more about how thermally broken steel windows can work for your project, or want to get a custom quote, feel free to reach out to our team to discuss your needs, share your project specifications, and walk through the benefits in more detail. Whether you’re an architect, general contractor, or homeowner, we’re here to help you find the right window solution for your budget and performance goals.
Slim Steel Window and Door References:
- National Fenestration Rating Council (NFRC) 2023 Fenestration Performance Standards.
- American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 2022 Thermal Conductivity Data for Building Materials.
- Steel Window Manufacturers Association (SWMA) 2021 Structural Performance Comparison of Steel vs. Aluminum Fenestration.
- U.S. Department of Energy (DOE) 2022 Energy Savings Potential of High-Performance Windows in Residential and Commercial Buildings.
- International Code Council (ICC) 2023 Wind and Water Resistance Standards for Exterior Fenestration.
PDA Steel Door and Window
We are one of the most experienced thermally broken steel window and door manufacturers and suppliers in China, also support customized service. Please feel free to buy high-grade thermally broken steel window and door in stock here from our factory. Quality products and reasonable price are available.
Address: No.8, Central Avenue, Jinghai Economic Development District, Tianjin
E-mail: Nancy@eng-pda.com
WebSite: https://www.pda-steelwindows.com/