{"id":623,"date":"2026-11-03T17:30:37","date_gmt":"2026-11-03T09:30:37","guid":{"rendered":"http:\/\/www.coloradomountainspirit.com\/blog\/?p=623"},"modified":"2026-11-03T17:30:37","modified_gmt":"2026-11-03T09:30:37","slug":"what-is-the-pressure-rating-of-an-hose-ends-4ba0-d62f91","status":"publish","type":"post","link":"http:\/\/www.coloradomountainspirit.com\/blog\/2026\/11\/03\/what-is-the-pressure-rating-of-an-hose-ends-4ba0-d62f91\/","title":{"rendered":"What is the pressure rating of AN hose ends?"},"content":{"rendered":"<p>If you\u2019ve ever worked with automotive, aerospace, or industrial fluid systems\u2014whether building a race car, modifying a hydraulic press, or troubleshooting a aircraft fuel line\u2014you\u2019ve probably encountered AN hose ends. For those of us who supply and troubleshoot these parts every day, one question comes up more than any other: What is the pressure rating of AN hose ends? It\u2019s not a one-size-fits-all answer, and it\u2019s a question that separates casual hobbyists from engineers who rely on these fittings for safety. As someone who\u2019s spent 12 years sourcing, testing, and supporting AN hose end products for shops, racers, and maintenance teams, I\u2019m here to break this down with real-world context, not just textbook specs. <a href=\"https:\/\/www.cnsiliconehose.com\/automotive-hose-fittings\/an-hose-end\/\">AN Hose End<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.cnsiliconehose.com\/uploads\/47874\/small\/silicone-radiator-hosesa345a.jpg\"><\/p>\n<p>First, let\u2019s clear up what \u201cAN\u201d stands for, because a lot of newer installers mix this up with other fitting standards. AN stands for Army-Navy, a U.S. military specification developed in the 1940s for standardized fittings to reduce inventory confusion across military aircraft and ground equipment. Unlike some commercial fitting standards that are loose or manufacturer-specific, AN fittings are dimensional and performance-tested to strict, consistent requirements. That consistency is why they\u2019re still the gold standard for systems that operate at high pressures\u2014far more reliable than generic hose ends you might pick up at a hardware store.<\/p>\n<p>Now, pressure ratings for AN hose ends don\u2019t work the same way across all types or sizes. Let\u2019s start with the most common AN hose end: the AN swivel nut hose end, often called a \u201cAN fitting\u201d for short. For standard steel AN 37-degree flare fittings, the baseline pressure rating depends on two main factors: the material the fitting is made of, and the AN size (from AN-3, the smallest common size, up to AN-20 and larger). The good news is that most original equipment manufacturer (OEM) AN steel fittings, which is what we supply, follow military specs, so their ratings are predictable. For example, an AN-3 steel hose end (the smallest, for lines as thin as 3\/16 inch) has a working pressure rating of approximately 1,500 PSI. That jumps to 2,500 PSI for AN-6 (a common size for power steering and small fuel lines) and peaks for steel fittings around AN-10, which is rated for 3,000 PSI. For larger sizes, the rating actually drops a bit\u2014AN-12 is 2,500 PSI, AN-16 is 2,000 PSI, and AN-20 is 1,500 PSI. That drop makes sense when you think about it: larger fittings have more surface area on the seal, so the pressure across that area creates more force, which means the fitting\u2019s structure has to be engineered to withstand that load, rather than just sheer strength of the metal.<\/p>\n<p>But wait\u2014what if you\u2019re using aluminum AN hose ends, which are popular for weight reduction in race cars or motorcycles? Aluminum AN fittings have a lower pressure rating than steel, usually around 50-60% of steel equivalents. That means an AN-6 aluminum fitting is only good for about 1,500 PSI, not 2,500, so you have to size your line and fitting accordingly. It\u2019s a common mistake for hobbyists: they go lighter with aluminum parts, forget the pressure penalty, and end up with a fitting that can\u2019t handle their system\u2019s pressure. We see this all the time when customers send back parts because they blow off under pressure\u2014most of the time, it\u2019s not a defect, it\u2019s a mismatch between the fitting material and the system\u2019s pressure needs.<\/p>\n<p>Another critical factor no one talks about: the hose itself. AN hose ends are only as strong as the hose they\u2019re paired with. That means even if your fitting is rated for 3,000 PSI, if you pair it with a generic rubber hose rated for 1,000 PSI, your system will fail at 1,000 PSI, not the fitting\u2019s rating. High-performance AN hoses\u2014like PTFE (Teflon) hose, which is the standard for race and performance systems\u2014come in different construction grades. A single-braided PTFE hose with AN hose ends has a working pressure of 1,000 PSI, double-braided is 2,000 PSI, and stainless steel-braided PTFE is 3,000 PSI. So you have to match the hose\u2019s pressure rating to the fitting\u2019s, not the other way around. For example, if you\u2019re building a high-pressure fuel system for a drag race car, you\u2019d pair a double-braided PTFE hose (rated 2,000 PSI) with steel AN-8 hose ends (rated 2,500 PSI) to give yourself a safety buffer.<\/p>\n<p>There\u2019s also static vs. dynamic pressure to consider. Static pressure is the pressure when the system is idling or not flowing\u2014what most people check with a pressure gauge. Dynamic pressure is the pressure spikes that happen when you accelerate, turn on a hydraulic pump, or pulse the system, like in a race car\u2019s fuel system. Those spikes can be 1.5 to 2 times the static pressure, so your AN hose end has to be rated for the dynamic pressure, not just the static. That\u2019s why racers and industrial maintenance teams almost always use a 2:1 safety margin. If your static dynamic pressure is 1,500 PSI, you want a fitting rated for at least 3,000 PSI\u2014never push a fitting to its exact working limit. We\u2019ve had customers come to us after a blowout: one was using AN-6 aluminum fittings for a turbo oil line, which had a 2,000 PSI dynamic spike, and the aluminum fitting couldn\u2019t handle it, blowing out at 1,800 PSI. Switching to steel AN-6 fittings solved the problem instantly.<\/p>\n<p>What about specialty AN hose ends, like crimp-style or reusable fittings? Crimp-style AN hose ends, which are more common for heavy-duty industrial and commercial applications, have different ratings than the flare-style AN fittings we talked about earlier. Crimped fittings are sealed with a crimp ring that compresses around the hose, so their pressure rating depends on the crimp tool used and the hose\u2019s wall thickness. Most crimp-style AN fittings are rated for up to 5,000 PSI for steel versions, which makes them ideal for hydraulic systems that operate at very high pressures. Reusable AN hose ends, on the other hand, let you remove and reuse the hose, so they\u2019re popular for custom builds, but their pressure ratings are usually lower\u2014around 1,000 to 2,000 PSI, depending on size and material. It\u2019s important to note that reusable fittings require special tools to install correctly; if they\u2019re not seated properly or tightened too much, their pressure rating drops significantly, which is a safety hazard.<\/p>\n<p>Another point: military vs. non-specified AN fittings. Some cheaper brands on the market label their fittings as \u201cAN\u201d but don\u2019t follow the military spec testing, so their pressure ratings are often exaggerated. For example, a non-spec AN-6 fitting might claim a 3,000 PSI rating, but actual lab testing might show it starts to fail at 1,800 PSI. That\u2019s why as a supplier, we only carry fittings that meet MIL-F-8795 specification, which requires rigorous testing for pressure, vibration, and corrosion resistance. We test every batch of our AN hose ends at our in-house pressure test lab, so we can guarantee the ratings you see on our spec sheets are accurate, not marketing hype. We\u2019ve seen too many customers buy cheap fittings online, use them in a critical system, and end up with failures that damage their equipment or, worse, cause injury.<\/p>\n<p>So what\u2019s the takeaway? The pressure rating of AN hose ends isn\u2019t a single number\u2014it depends on four key variables: fitting material (steel vs. aluminum), fitting size, type of fitting (flare, crimp, reusable), and the hose it\u2019s paired with, plus dynamic pressure spikes and your system\u2019s safety margin. To give you a concrete example: a street rod\u2019s fuel system, which operates at a maximum static pressure of 600 PSI, would work fine with steel AN-6 flare hose ends paired with a double-braided PTFE hose (rated 2,000 PSI), giving a more than 3:1 safety margin. A hydraulic lift for a workshop, which runs at 2,000 PSI static, would need steel crimp-style AN-8 hose ends paired with a heavy-duty hydraulic hose, rated for at least 4,000 PSI total.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.cnsiliconehose.com\/uploads\/47874\/small\/1-2-inch-silicone-tubing37b75.jpg\"><\/p>\n<p>If you\u2019re planning a build, troubleshooting a leak, or just want to make sure your system is safe, don\u2019t guess at pressure ratings. Our team has decades of experience working with AN hose ends for every application, from small motorcycles to heavy industrial machinery. We can help you select the right fitting size, material, and type to match your system\u2019s requirements, test the fittings to ensure they meet your needs, and answer any questions you have about installation or maintenance. Whether you\u2019re a hobbyist building your first race car or a fleet manager maintaining hydraulic equipment, we\u2019re here to make sure you get the right AN hose ends for your job. To discuss your specific needs and place an order, reach out to our team today.<\/p>\n<p><a href=\"https:\/\/www.cnsiliconehose.com\/rubber-hose\/rubber-air-hose\/\">Rubber Air Hose<\/a> References<\/p>\n<ol>\n<li>Military Specification MIL-F-8795F: Fittings, Fluid System, General Specification For, U.S. Department of Defense, 2018.<\/li>\n<li>SAE International Standard AS 1200: Fluid Power Connections, 37-Degree Flare Type, 1998.<\/li>\n<li>\u201cAN Hose and Fitting Pressure Ratings,\u201d Performance Automotive Engineering Association Tech Bulletin, 2021.<\/li>\n<li>Hydraulic Institute Standard HI\/RP 12: Selection, Installation, and Maintenance of Hose Assemblies, 2020.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.cnsiliconehose.com\/\">Ningbo Haidu Auto Parts Co., Ltd.<\/a><br \/>As one of the most professional an hose end manufacturers and suppliers in China, we&#8217;re featured by cheap products and good service. Please rest assured to buy durable an hose end at competitive price from our factory. Also, OEM service is available.<br \/>Address: <br \/>E-mail: Sale6@sterlingautoparts.com<br \/>WebSite: <a href=\"https:\/\/www.cnsiliconehose.com\/\">https:\/\/www.cnsiliconehose.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever worked with automotive, aerospace, or industrial fluid systems\u2014whether building a race car, modifying &hellip; <a title=\"What is the pressure rating of AN hose ends?\" class=\"hm-read-more\" href=\"http:\/\/www.coloradomountainspirit.com\/blog\/2026\/11\/03\/what-is-the-pressure-rating-of-an-hose-ends-4ba0-d62f91\/\"><span class=\"screen-reader-text\">What is the pressure rating of AN hose ends?<\/span>Read more<\/a><\/p>\n","protected":false},"author":352,"featured_media":623,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[586],"class_list":["post-623","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-an-hose-end-4db5-d6d2b8"],"_links":{"self":[{"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/posts\/623","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/users\/352"}],"replies":[{"embeddable":true,"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/comments?post=623"}],"version-history":[{"count":0,"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/posts\/623\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/posts\/623"}],"wp:attachment":[{"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/media?parent=623"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/categories?post=623"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.coloradomountainspirit.com\/blog\/wp-json\/wp\/v2\/tags?post=623"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}